BH-GSP Gas Sampling Pump

The gas sampling pump is a self-priming pump that can be used with a gas detector.

Introduction

The gas sampling pump is a self-priming pump that can be used on a gas detector. The principle uses a carbon membrane self-priming type. The gas to be detected can be pumped through the sampling pump, and the gas detector is used to calibrate the gas leak. The content is small, the operation is simple, and the pumping probe is extended.

 

Display method:
LCD
Inspiratory flow:
500ml/min
Working humidity:
≤97%RH
Preheat time:
<20S
Standard configuration:
Probe, Hose, Charger
Operating Voltage:
DC3.7v 1800mAH
Alarm volume:
75dB
Ambient temperature:
-20 ~50℃
Dimensions:
225mmx65mmx30mm(长x宽x高)
Probe length:
220mm

 

Specifications
Model Range L-alarm H-alarm
CO 0-1000ppm 35ppm 200ppm
O2 0-30%vol 19.5%vol 23.5%vol
H2 0-100%LEL 20%LEL 50%LEL
H2S 0-100ppm 10ppm 20ppm
CH4 0-100%LEL 20%LEL 50%LEL
C2H4O 0-20ppm 10ppm 15ppm
C2H4 0-100%LEL 20%LEL 50%LEL
C3H8 0-100%LEL 20%LEL 50%LEL
C2H5OH 0-100%LEL 20%LEL 50%LEL
NH3 0-100ppm 25ppm 50ppm
CL2 0-20ppm 5ppm 10ppm
O3 0-20ppm 5ppm 10ppm
SO2 0-100ppm 2ppm 5ppm
PH3 0-20ppm 0.3ppm 5ppm
CO2 0-50000ppm 1000ppm 2000ppm
NO 0-250ppm 20ppm 50ppm
NO2 0-20ppm 5ppm 10ppm
HCN 0-500ppm 10ppm 20ppm
HCL 0-50ppm 10ppm 20ppm
CH2O 0-10ppm 2ppm 5ppm
VOC 0-100ppm 20ppm 50ppm
C6H6 0-100ppm 20ppm 50ppm

 

Video
Inquiry

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.

*
*