BH-50 Gas control panel-one road

BH-50 Gas Monitor System is a multipoint controller system. It is used for detecting gas concentration in the air. The system could connect to detectors for different gases in the same time. The system adopts MCU as control unit, excellent gas sensor with high sensitivity and fast response. It will give visual and audible alarm when the gas concentration reach or exceed the presetting alarm level to remind you to take effective actions in time and it could also start the ventilation fan and other equipment to prevent from accident and explosions.

Introduction

BH-50 Gas Monitor System is a multipoint controller system. It is used for detecting gas concentration in the air. The system could connect to detectors for different gases in the same time. The system adopts MCU as control unit, excellent gas sensor with high sensitivity and fast response. It will give visual and audible alarm when the gas concentration reach or exceed the presetting alarm level to remind you to take effective actions in time and it could also start the ventilation fan and other equipment to prevent from accident and explosions.

BH-50 Gas Monitor System

Specifications
Product type: BH-50 Gas controller
Channel: Single channel,two channels,four channels
Power supply: AC220V±10% 50Hz
Consumption: ≤10W
Signal input: 4~20mA and RS485
Single output: two lines RS485(MODBUS)
Working temperature: -10℃~50℃
Working humidity: 0-95%RH (no dew)
Contact output: Free contact output, max power 1kW
Installation method: Wall-mounted
Dimensions: 380x210x80mm(L×W×H)

 

Video

Inquiry

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.

*
*
*
*
*