Fire and Gas Detection System In Oil and Gas

2020-11-27 10:11:16
Workplaces in the oil and gas industry are very dangerous. Once a leak occurs, it can easily cause serious consequences. Therefore, a complete and safe fire and gas detection system is required. Bosean is a professional gas detector manufacturer, which can provide a variety of portable and fixed gas detectors.
fire and gas detection system in oil and gas
liquefied petroleum gas
The specific gravity of liquefied petroleum gas is almost twice that of air, and the leakage and accumulation in low-lying places are not easy to dissipate. Therefore, even if there is a weak leak in any of the many connections, the explosive concentration of the gas can be easily reached.
Precaution:
The gas detector installed in each low-lying place can continuously detect any gas leakage, thereby ensuring the safety of personnel in the LPG station. In order to avoid the risk of explosion, the safety power switch of the fuel system can be automatically turned off to avoid explosion once the gas leakage is detected or the dangerous gas concentration is reached.
Compressed Natural Gas (CNG)
Gas hazards: The specific gravity of liquefied petroleum gas is almost twice that of air, and it is not easy to dissipate when leaking and accumulating in low-lying places. Therefore, even if there is a weak leak in any of the many connections, the explosive concentration of the gas can be easily reached.
Preventive measures: The methane detector is installed in the compressor room. If the detector detects methane, the detector will shut down the entire fuel system to prevent the leaked gas from reaching explosive concentrations. At the same time, the detector will alarm to warn of danger.
 
According to the gas chemistry, the detection site determines the installation location and installs the detector. The detector transmits the signal to the alarm controller through the connection method of the bus system. The alarm controller integrates processing and outputs to the management device through RS485 signal. After unified processing by the management device, it is output to customized software via the network, and operations such as viewing and exporting print data can be performed on the software.
fire and gas detection system in oil and gas
 
For more solutions and configurations, please consult our sales and technical department at any time. We will provide you with a complete gas detection configuration, and consider the safety of your company and employees in real time.
Inquiry

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.

*
*
*